The term "self-priming pump" describes a centrifugal pump which can use an air-water mixture to achieve a fully primed pumping condition. In other words, which self-primes without needing to be fed from a higher source. With over 20 different types of self-priming pumps, MP Pumps has the right product for your agricultural, commercial, industrial, marine, OEM and transport needs.
FMX 75
The FMX series includes all 316 stainless steel components for superior corrosion resistance when pumping chemical compounds or resistance in saline environments.
The FMX 75 is available with 115v AC, 12v DC or 24v DC power supply, as well as a hydraulically powered model.
- Suction and repression : 3/4 in
- Max flow : Up to 21 gpm
- Max pressure : Up to 23 ft
- Aspiration : 12 ft
- Materials : Stainless steel
Hydraulic version
- Max flow: Up to 30 gpm
- Max pressure: Up to 50 ft
- Hydraulic needs : 2.5 gpm @ 800 psi
- Characteristic : Different mechanical joint available
ABS approved
Technical Sheet - Hydraulic version
FMX 100
- Suction and repression : 1 in
- Aspiration : 17 ft
- Max flow : Up to 55 gpm
- Max pressure : Up to 60 ft
- Materials : Stainless steel
Hydraulic version
- Max flow : Up to 60 gpm
- Max pressure : Up to 160 ft
- Hydraulic needs : 6 gpm @ 1400 psi
- Characteristic : Different mechanical joint available
ABS approved
https://www.gardnerdenver.com/en-us/mppumps/self-priming-pumps
FLOMAX 5 & 8
The FLOMAX series 5 and 8 are pumps that have a compact mounting, by direct coupling, to hydraulic or electric motors with 56C and 145TC frames with fuel or even belt driven motors.
- Suction and repression : 1 ½ and/or 2’’
- Max flow: Up to 150 gpm
- Max pressure : Up to 100 ft
- Solid capacity : 0.56’’
- Materials : Cast iron, bronze, stainless steel or aluminum
- Characteristic : Different mechanical joint available
Possibility of double sealing for dry use
Many different mounting are possible
Technical sheet - 5
Technical sheet - 8
Technical Sheet - 5 Hydraulic version
Technical Sheet - 8 Hydraulic version
FLOMAX 10 & 15
The FLOMAX series 10 and 15 pumps are pumps that have a compact mounting, by direct coupling, to hydraulic or electric motors with 182TC and 215C frames with fuel or even belt driven motors.
- Suction and repression : 2 and/or 3’’
- Max flow: Up to 320 gpm
- Max pressure : Up to 145 ft
- Solid capacity : 0.625’’
- Materials : Cast iron, bronze or stainless steel
- Characteristic : Different mechanical joint available
Possibility of double sealing for dry use
Special model in 316 stainless steel
ABS approved
FLOMAX 30 & 35
The FLOMAX series 30 and 35 pumps are pumps that have a compact mounting, by direct coupling, pedestal or electric with 182TC and 286TC frame, as well as with fuel engine.
- Suction and repression : 3 and/or4’’
- Max flow: Up to 500 gpm
- Max pressure : Up to 190 ft
- Solid capacity : 0.60’’
- Materials : Cast iron, bronze or stainless steel
- Characteristic : Different mechanical joint available
ABS approved
FLOMAX 40
The FLOMAX series 40 pump is a pump that can have a compact mounting, by direct coupling, pedestal or electric with 215JP frame, as well as with a fuel engine.
- Suction and repression : 4’’
- Max flow: Up to 750 gpm
- Max pressure : Up to 225 ft
- Solid capacity : 0.65’’
- Materials : Cast iron or Bronze
- Characteristic : Different mechanical joint available
ABS approved
HHLF
The high pressure water pump HHLF “HIGH OUTPUT” is supplied with an O-ring located in the discharge port, which increases the seal when the pressure increases. This self-priming centrifugal pump contains an impeller and volute that have been designed to eliminate premature prime losses and increase pressure.
The HHLF is available with 184TC power supply, combustion engine, as well as a hydraulically powered model.
HHLF
- Suction and repression : 1 ½ and/or 2’’
- Max flow : Up to 150 gpm
- Max pressure: Up to 250 ft
- Solid capacity : 0.65’’
- Materials : Cast iron or Bronze
- Solid capacity : 0.37’’
- Aspiration : 25 ft
- Characteristic : Different mechanical joint available
Hydraulic version
- Max flow : Up to 180 gpm
- Max pressure : Up to 300 ft
- Hydraulic needs : 14 gpm @ 2400 psi
ABS approved
Technical sheet - HO
Technical sheet - HR
Technical Sheet - Hydraulic version
English 
French