SUBMERSIBLE PUMPS

We understand the drying needs of our customers, which vary by location and application. As a result, the submersible range we supply is developed for the applications of drainage (D) and of sludge (S). These applications require pumps specifically designed for handling corrosive and abrasive media and their solid contents.

All Atlas Copco Brand Weda models are built to last, with their aluminum and stainless steel construction. Most of our submersible pump models can be easily repaired or even refurbished.

weda d04N à 10

WEDA D04N TO D10N

  • Suction and repression : 2’’
  • Max flow: Up to 119 gpm
  • Max pressure : Up to 53.3 ft
  • Solid capacity : 0.18’’
  • Energy : Available in 1 or 3 phases
  • Strength : Up to 1.3 hp
  • Materials : Aluminum & stainless steel
  • Characteristic : Perfect for small jobs

Technical sheet

 

D30L à D100N

WEDA D30L TO D100N

  • Suction and repression : from 3 to 10"
  • Max flow : Up to 6100 gpm
  • Max pressure : Up to 325 ft
  • Solid capacity : 0.47’’
  • Energy : Available in 1 or 3 phases
  • Strength : Up to 84 hp
  • Materials : Aluminum & stainless steel
  • Characteristic : easy repair kit (quick install)
  • Many parts available and refurbishing also

View brochure

 

Pompe à boue(2)

SLUDGE PUMPS

WEDA mud pumps can handle thick, soft and wet sludge or other similar viscous mixtures of liquids and solids, especially the product of an industrial or refining process..

  • Suction and repression : 2 to 4"
  • Max flow: Up to 420 gpm
  • Max pressure : Up to 100 ft
  • Solid capacity : 2’’
  • Energy : Available in 1 or 3 phases
  • Strength : Up to 9.2 hp
  • Materials : Aluminum & stainless steel
  • Characteristic : easy repair kit (quick install)
  • Very light pump

View brochure

DIP
DOP

PNEUMATIC SUBMERSIBLE PUMPS (DIP AND DOP)

DIP centrifugal pumps can be designed to suit multiple operations. With a simple change of thruster and intake ring, you can adjust the desired capacity and height. That means you get a three in one solution. The DIP is designed to handle relatively clean low viscosity liquids such as water and coolants.

  • Max flow : from 174 to 443 gpm
  • Max pressure : from 82 to 193 ft
  • Energy : 148 cfm @ 87 psi
  • Materials : Cast iron with stainless steel thruster
  • Characteristic : pneumatic centrifuge

 

When the going gets tough, the toughest get a DOP diaphragm pump. They are designed for the most polluted and viscous fluids, as well as for highly abrasive and flammable fluids.

  • Max flow : 110 gpm
  • Max pressure : 193 ft
  • Energy : 72 cfm @ 87 psi
  • Materials : Aluminum
  • Characteristic : Submersible diaphragm pump
HYDRASUB

HYDRASUB

CThis model of submersible pump is rather particular by its hydraulic supply, which makes it a rare model. It is easy to transport and very light due to its aluminum design. The hydraulics required for its operation vary but do not require significant hydraulic capacity.

  • Repression : 3’’
  • Max flow : Up to 400 gpm
  • Max pressure : Up to 108 ft
  • Solid capacity : 0.50’’
  • Engine : Hydraulic
  • Materials : Aluminum
  • Characteristic : Light, easy to transport and corrosion resistant

For more info visit https://www.gardnerdenver.com/en-us/mppumps/submersible-pumps

pour autre pièce disponible mettre image

OTHER MODELS AND PARTS AVAILABLE

WASTE

SELF-PRIMING

CENTRIFUGAL

PETITES

SPECIAL

en_CAEnglish