The term "self-priming pump" describes a centrifugal pump which can use an air-water mixture to achieve a fully primed pumping condition. In other words, which self-primes without needing to be fed from a higher source. With over 20 different types of self-priming pumps, MP Pumps has the right product for your agricultural, commercial, industrial, marine, OEM and transport needs.
All the pumps below are ABS type approved product
FMX 75
The FMX Series features all 316 stainless steel components for superior corrosion resistance when pumping chemical compounds or resistance in salt environments.
The FMX 75 is available with 115v AC, 12v DC or 24v DC power supply, as well as a hydraulically powered model.
- Sutcion and pressure : 3/4 inch
- Max flow : up to 21 gpm
- Max pressure : up to 23 inch
- Suction : 12 inch
- Material: Stainless steel
Hydraulic version
- Max flow. : up to 30 gpm
- Max pressure. : up to 50 inch
- Hydraulic needs : 2.5 gpm @ 800 psi
- Caracteristic : Different mechanical seal available
ABS Type approved
FMX 100
- Suction and pressure : 1 inch
- Aspiration : 17 ft
- Max. flow : Up to 55 gpm
- Max. pressure : Up to 60 inch
- Material: Stainless steel
Hydraulic version
- Max flow : up to 60 gpm
- Max pressure : Up to 160 inch
- Hydraulic needs : 6 gpm @ 1400 psi
- Caracteristic : Different mechanical seal available
ABS Type approved
https://www.gardnerdenver.com/en-us/mppumps/self-priming-pumps
FLOMAX 5 & 8
The FLOMAX series 5 and 8 are pumps that have a compact mounting, by direct coupling, to hydraulic or electric motors with 56C and 145TC frames with fuel or even belt driven motors.
- Suction and pressure : 1 ½ and 2’’
- Max flow. : Up to 150 gpm
- Max ressure : Up to 100 inch
- Max solid : 0.56’’
- Material : Cast iron, bronze, stainless steel or aluminum
- Caracteristic : Different mechanical seal available
Possibility of double sealing for dry use
ABS Type approved
Many different mounting are possible
Technical sheet - 5
Technical sheet - 8
Technical sheet - 5 hydraulic
Technical sheet - 8 hydraulic
FLOMAX 10 & 15
Pumps 10 and 15 of the FLOMAX series are pumps which have a compact assembly, by direct coupling, to hydraulic or electric motors with 182TC and 215C chassis as well as to fuel motors or even by belt.
- Suction et pressure : 2 and 3’’
- Max flow : Up to 320 gpm
- Max pressure : Up to 145 inch
- Max. solid : 0.625’’
- Material : Cast iron, bronze or stainless steel
- Caracteristic : Different mechanical seal available
Possibility of double sealing for dry use
Modèle spécial en acier inox 316
ABS Type approved
FLOMAX 30 & 35
The 30 and 35 pumps of the FLOMAX series are pumps which have a compact assembly, by direct coupling, pedestal or electric to frame 182TC and 286TC, as well as with fuel engine
- Suction et pressure : 3 and 4’’
- Max flow : Up to 500 gpm
- Max pressure : Up to 190 inch
- Max. solid : 0.60’’
- Material : Cast iron, bronze or stainless steel
- Caracteristic : Different mechanical seal available
ABS Type approved
FLOMAX 40
The 40 pump of the FLOMAX series is a pump that can have compact mounting, by direct coupling, pedestal or electric with 215JP frame, as well as with fuel motor.
- Suction et pressure : 4’’
- Max. flow. : Up to 750 gpm
- Max pressure : Up to 225 pi.
- Max solid : 0.65’’
- Material : Cast iron, Bronze
- Caracteristic : Different mechanical seal available
ABS Type approved
HHLF
The HHLF “HIGH OUTPUT” high pressure water pump comes with an O-ring located in the discharge port, which increases the seal as pressure increases. This self-priming centrifugal pump contains an impeller and volute that have been designed to eliminate premature loss of prime and increase pressure.
The HHLF is available with 184TC electric power, combustion engine, as well as a hydraulically powered model.
HHLF
- Suction and pressure : 1 ½ and 2’’
- Max flow : Up to 150 gpm
- Max pressure : Up to 250 inch
- Max solid : 0.65’’
- Material :Cast iron ou Bronze
- Capacité solide : 0.37’’
- Aspiration : 25 ft.
- Caracteristic : Different mechanical seal available
Hydraulic version
- Max flow : Up to 180 gpm
- Max pressure : Up to 300 inch
- Hydraulic needs : 14 gpm @ 2400 psi
ABS Type approved
Technical sheet - HO
Technical sheet - HR
Technical sheet - Hydraulic
OTHER MODELS AND PARTS AVAILABLE
